Automobile industry
Due to the good physical properties of SMC and BMC, they are widely used in the automotive industry. Such as bumpers, seat frames, battery boxes, engine under covers, structural beams, etc.
Achitechive
In the construction industry, due to the good thermal insulation properties of SMC and BMC, as well as anti-skid and anti-corrosion, they are often used in roof components, shower bases, sinks, bathtub floor systems, exterior door panels, and so on.
Bathroom facilities
The bathroom is equipped with SMC ceiling and chassis, with high density and high strength. Through the embedded seamless assembly with the VCM wall, the bathroom chassis is drip-proof, without any traditional waterproofing engineering, so that your bathroom will never get wet.
Electrical industry
In terms of electrical appliances, the high strength, corrosion resistance, low water absorption, and flame retardancy of SMC and BMC make it widely used in the production of electrical enclosures, switch parts, circuit boards, heat shields, fuses, etc. SMC and BMC are very flexible raw materials. The formulation of the raw materials can be customized and modified according to the use conditions of the customer's finished product, so as to adapt to the application environment of the product to the greatest extent.
SMC is a sheet molding compound, which is a kind of mixed polymer resin. The raw materials include glass fiber, minerals, and fillers. The BMC material is a mixture of thermosetting plastic resins in the form of pellets. Due to its short fibers, the fluidity is slightly better than that of SMC. One of the advantages of SMC and BMC materials over metal materials is that they can be customized according to the needs of processing and end customers.
In the production process of SMC and BMC products, the method of paving the raw materials is also very important. The paving needs to adjust the cutting method, size, weight, etc. of the raw materials according to the structure of the product, considering the fluidity of the raw materials, and the welding position. Cause the product to have nicks, cracks and other problems.
All SMC or BMC products have a flash cleaning process. If it is a mold with excellent quality, the flash will be very thin, and the cleaning process is very simple. The process of flash cleaning can be automated or manually operated by a machine.
DEYING company strictly controls the production process of products, and each link is followed by professionals to ensure that problems are found and resolved early.
MB/Wechat/Whatsapp:+0086-13456489912
sophiemould@foxmail.com
Post time: Jul-01-2021